# 3D printed mount **URL:** \ **Category:** Uncategorized\ **Created:** [August 13, 2020, 11:15pm UTC](https://forum.electromage.com/t/3d-printed-mount/507 "2020-08-13T23:15:34Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![jpm](https://forum.electromage.com/letter_avatar_proxy/v4/letter/j/b487fb/32.png) [@jpm](https://forum.electromage.com/u/jpm)\ **Post date:** [August 13, 2020, 11:15pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/1 "2020-08-13T23:15:34Z")
I needed a 3D printed mount for my Pixelblaze PCB, so here it is for all to enjoy… > **[Pixelblaze board mount/holder by JPMakesStuff](https://www.thingiverse.com/thing:4569299)** > > Little bracket to mount your Pixelblaze PCB > Pixelblaze LED strip controller from: https://www.bhencke.com > Features... > Pegs that go in the holes on the PCB > (melt the top of these with your soldering iron for extra mounting security) > two screw-hole... ---
**Author:** ![cjn566](https://forum.electromage.com/user_avatar/forum.electromage.com/cjn566/32/3029_2.png) [@cjn566](https://forum.electromage.com/u/cjn566)\ **Post date:** [August 14, 2020, 6:18pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/2 "2020-08-14T18:18:16Z")
That’s awesome! Any way I could Venmo you to ship me a couple? ---
**Author:** ![cjn566](https://forum.electromage.com/user_avatar/forum.electromage.com/cjn566/32/3029_2.png) [@cjn566](https://forum.electromage.com/u/cjn566)\ **Post date:** [August 22, 2020, 8:01pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/4 "2020-08-22T20:01:39Z")
Just got em in the mail. They work great. Thanks! ---
**Author:** ![jpm](https://forum.electromage.com/letter_avatar_proxy/v4/letter/j/b487fb/32.png) [@jpm](https://forum.electromage.com/u/jpm)\ **Post date:** [November 13, 2020, 2:46pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/5 "2020-11-13T14:46:22Z")
Updated link to the for-sale version of the mount: > **[Mount for PixelBlaze PCB by JPElectron.com on Tindie](https://www.tindie.com/products/jpelectron/mount-for-pixelblaze-pcb/)** > > Printed plastic mount for the PixelBlaze circuit board or if you have your own 3D printer: > **[Pixelblaze PCB holder mount by JPMakesStuff](https://www.thingiverse.com/thing:4569299)** > > Little bracket to mount your Pixelblaze PCB > Pixelblaze LED strip controller from: https://www.bhencke.com > Features... > Pegs that go in the holes on the PCB > (melt the top of these with your soldering iron for extra mounting security) > two screw-hole... ---
**Author:** ![SeaLaVie](https://forum.electromage.com/user_avatar/forum.electromage.com/sealavie/32/666_2.png) [@SeaLaVie](https://forum.electromage.com/u/SeaLaVie)\ **Post date:** [February 9, 2021, 10:36pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/6 "2021-02-09T22:36:36Z")
> [@jpm](#): > > Updated link to the for-sale version of the mount: > > ![](https://d2ss6ovg47m0r5.cloudfront.net/ico/favicon.ico) [Tindie](https://www.tindie.com/products/jpelectron/mount-for-pixelblaze-pcb/) > > ### [Mount for PixelBlaze PCB by JPElectron.com on Tindie](https://www.tindie.com/products/jpelectron/mount-for-pixelblaze-pcb/) > > Printed plastic mount for the PixelBlaze circuit board Will this also work with the V3? ---
**Author:** ![wizard](https://forum.electromage.com/user_avatar/forum.electromage.com/wizard/32/4_2.png) [@wizard](https://forum.electromage.com/u/wizard)\ **Post date:** [February 9, 2021, 11:12pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/7 "2021-02-09T23:12:44Z")
Hi @SeaLaVie, The V3 Standard is almost identical physically to the V2+, however the mounting hole on the bottom right was removed. It looks like the print has columns designed to fit in the mounting holes, and if the bottom right one was trimmed it would still work as a support without lifting the PCB too much. The antenna is slightly larger, but nothing in the mount conflicts with that. ---
**Author:** ![jpm](https://forum.electromage.com/letter_avatar_proxy/v4/letter/j/b487fb/32.png) [@jpm](https://forum.electromage.com/u/jpm)\ **Post date:** [February 18, 2021, 7:48pm UTC](https://forum.electromage.com/t/3d-printed-mount/507/8 "2021-02-18T19:48:09Z")
Thanks @wizard exactly right, just snip the lower right plastic tower with some wire cutters and your V3 board fits just perfect! Note I’ve updated to rev2 of my mount which fits both V2 and V3 of the Pixelblaze board… - rev2 has cut-outs to access the solder pads on the back of the Pixelblaze board - rev2 has LH or RH embossed on the side - rev2 makes the USB plug area larger to accommodate larger plugs - rev2 has taller pegs and corner support for melting over with soldering iron, thus preventing Pixelblaze board removal