# Broncos Cheer / Sync mode

**URL:** <https://forum.electromage.com/t/broncos-cheer-sync-mode/3339>\
**Category:** Uncategorized\
**Created:** [December 25, 2023, 7:37am UTC](https://forum.electromage.com/t/broncos-cheer-sync-mode/3339 "2023-12-25T07:37:34Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![wizard](https://forum.electromage.com/user_avatar/forum.electromage.com/wizard/32/4_2.png) [@wizard](https://forum.electromage.com/u/wizard)\
**Post date:** [September 4, 2024, 9:07pm UTC](https://forum.electromage.com/t/broncos-cheer-sync-mode/3339/14 "2024-09-04T21:07:01Z")

</div>

There is a hard 10 client limit for pixelblaze AP mode WiFi. You wouldn’t want more than 9 clients/followers in that setup because your phone/laptop wouldn’t have a spot.

There is a roughly 10 follower recommended limit. 10 followers works well for all supported features.

You can have more than 10 followers when you use a dedicated WiFi router.

Some issues may happen if you connect a lot more than 10. Usually problems arise when you power up everything at the same time, or are sharing sensor board data with lots of followers. I found issues with 30 followers and no sensor board data, where sometimes it would take a long time for things to sync up but it wasn’t completely broken.

---

_[View the full topic](https://forum.electromage.com/t/broncos-cheer-sync-mode/3339)._