# Case for output expander and sensor board?

**URL:** <https://forum.electromage.com/t/case-for-output-expander-and-sensor-board/4698>\
**Category:** Uncategorized\
**Created:** [May 31, 2026, 8:46pm UTC](https://forum.electromage.com/t/case-for-output-expander-and-sensor-board/4698 "2026-05-31T20:46:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sunandmooncouture](https://forum.electromage.com/letter_avatar_proxy/v4/letter/s/e56c9b/32.png) [@Sunandmooncouture](https://forum.electromage.com/u/Sunandmooncouture)\
**Post date:** [May 31, 2026, 8:46pm UTC](https://forum.electromage.com/t/case-for-output-expander-and-sensor-board/4698/1 "2026-05-31T20:46:19Z")

</div>

Has anyone designed a case that will fit all 3? the pixelblaze standard v3, sensor board, and output expander?

---

<div class="post-metadata">

**Author:** ![jeff](https://forum.electromage.com/user_avatar/forum.electromage.com/jeff/32/3473_2.png) [@jeff](https://forum.electromage.com/u/jeff)\
**Post date:** [June 1, 2026, 12:25am UTC](https://forum.electromage.com/t/case-for-output-expander-and-sensor-board/4698/2 "2026-06-01T00:25:49Z")

</div>

Yes! It’s a little large (space for wagos, lipo board, usb-c power decoy) but it’s rugged and versatile. I put so much effort into it I was considering putting it up for sale somewhere. I’m not at home but let me send you some files later.

 ![IMG_1028](https://forum.electromage.com/uploads/default/original/2X/4/4028d81438deced0af66f342259a09f02117eb05.jpeg)

 ![IMG_0991](https://forum.electromage.com/uploads/default/original/2X/7/7043af9a235cae9071bb2d07a6c8ab8ffbb8dcce.jpeg)

 ![IMG_1020](https://forum.electromage.com/uploads/default/original/2X/6/6bffefd291a6c0c8534f50214e73908437dd10e0.jpeg)

 ![IMG_1031](https://forum.electromage.com/uploads/default/original/2X/7/787cb50ca135677ca4a28370680bf8fe8cfd9023.jpeg)

---

<div class="post-metadata">

**Author:** ![Sunandmooncouture](https://forum.electromage.com/letter_avatar_proxy/v4/letter/s/e56c9b/32.png) [@Sunandmooncouture](https://forum.electromage.com/u/Sunandmooncouture)\
**Post date:** [June 1, 2026, 4:00pm UTC](https://forum.electromage.com/t/case-for-output-expander-and-sensor-board/4698/3 "2026-06-01T16:00:14Z")

</div>

I don’t see an output expander in there?