# Controlling to pixelblaze **URL:** \ **Category:** Troubleshooting\ **Created:** [November 27, 2020, 3:46pm UTC](https://forum.electromage.com/t/controlling-to-pixelblaze/765 "2020-11-27T15:46:34Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![jeff](https://forum.electromage.com/user_avatar/forum.electromage.com/jeff/32/3473_2.png) [@jeff](https://forum.electromage.com/u/jeff)\ **Post date:** [November 27, 2020, 5:54pm UTC](https://forum.electromage.com/t/controlling-to-pixelblaze/765/4 "2020-11-27T17:54:54Z")
That’s correct! The [Getting Started](https://forum.electromage.com/t/how-do-i-update-pixelblaze/213/5) page goes through all the steps. You’d follow the “create AP” flow. In your car, connect a phone to the WiFi the Pixelblaze creates and go to [http://192.168.4.1](http://192.168.4.1) and you’ll see the control interface. You may wish to test the 2.4Ghz reception in your car setup since there’s a lot of metal in a car. I’ve never tried, but hiding the PB board in the bumper might not provide a strong enough signal. --- _[View the full topic](https://forum.electromage.com/t/controlling-to-pixelblaze/765)._