# Having trouble reconnecting to wifi **URL:** \ **Category:** Troubleshooting\ **Created:** [November 8, 2025, 10:08pm UTC](https://forum.electromage.com/t/having-trouble-reconnecting-to-wifi/4576 "2025-11-08T22:08:17Z")\ **Posts on this page:** 1\ **Showing post:** 11
**Author:** ![wizard](https://forum.electromage.com/user_avatar/forum.electromage.com/wizard/32/4_2.png) [@wizard](https://forum.electromage.com/u/wizard)\ **Post date:** [November 17, 2025, 6:31pm UTC](https://forum.electromage.com/t/having-trouble-reconnecting-to-wifi/4576/11 "2025-11-17T18:31:27Z")
On the bottom of [this post](https://forum.electromage.com/t/v3-66-release-community-patterns-pixelblaze-integration-more-led-types/3891) you’ll see 2 links for files ending in “.stfu” - one is for the standard, one is for the pico model. Then do this part: > [@wizard](#): > > Connect to the Pixelblaze\_XXXXXX network, dismiss the stuck spinning cube modal (check in the dots menu on the top right), but stay connected to it’s wifi network. Load up a browser and get to the recovery tool: > > [http://192.168.4.1/recovery](http://192.168.4.1/recovery) > > From there, you can upload the firmware file, which will hopefully replace the web app file and fix the spinning cube screen. The recovery tool is a basic white page, with an Update tab. There’s a section called “Upload Update File” - this is where you can upload the .stfu file. --- _[View the full topic](https://forum.electromage.com/t/having-trouble-reconnecting-to-wifi/4576)._