# Having trouble upgrading

**URL:** <https://forum.electromage.com/t/having-trouble-upgrading/2951>\
**Category:** Uncategorized\
**Created:** [May 18, 2023, 9:37pm UTC](https://forum.electromage.com/t/having-trouble-upgrading/2951 "2023-05-18T21:37:30Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jeff](https://forum.electromage.com/user_avatar/forum.electromage.com/jeff/32/3473_2.png) [@jeff](https://forum.electromage.com/u/jeff)\
**Post date:** [May 22, 2023, 2:43am UTC](https://forum.electromage.com/t/having-trouble-upgrading/2951/2 "2023-05-22T02:43:43Z")

</div>

Hi @chrisla23 -

I haven’t heard many people have issues lately, but that is a fairly old v2 firmware (perhaps January 2020 I believe).

Let’s try having you upgrade manually. First, check your available memory, especially if you’ve loaded a bunch of patterns on this device. I forget for that particular firmware how much must be available, but it’s be good to see 100K available or more. To be safe, you could export a few of the largest patterns first and delete them from that controller.

Then download [the latest firmware for V2’s, v2.29](https://forum.electromage.com/t/v2-29-release-pattern-compatibility-with-v3-24-and-more/2519) from the News and Announcements category post.

Now, connect to http://\<your device’s IP address\>/update

Upload the .stfu file you downloaded to this page and wait until the upload finishes and it reboots.

Let us know how that goes.

---

_[View the full topic](https://forum.electromage.com/t/having-trouble-upgrading/2951)._
