# L3D 8x8 Cube Mapping?

**URL:** <https://forum.electromage.com/t/l3d-8x8-cube-mapping/3252>\
**Category:** Patterns and Code\
**Created:** [October 26, 2023, 9:55am UTC](https://forum.electromage.com/t/l3d-8x8-cube-mapping/3252 "2023-10-26T09:55:24Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![wizard](https://forum.electromage.com/user_avatar/forum.electromage.com/wizard/32/4_2.png) [@wizard](https://forum.electromage.com/u/wizard)\
**Post date:** [October 27, 2023, 4:17pm UTC](https://forum.electromage.com/t/l3d-8x8-cube-mapping/3252/4 "2023-10-27T16:17:29Z")

</div>

Totally doable.

> [@Pixelblaze Volumetric Cube](https://forum.electromage.com/t/pixelblaze-volumetric-cube/721):
>
> Pixelblaze Volumetric Cube Firework nova (now on the pattern site!) Thread on the build To music: This is a volumetric LED cube made up of 64 x 8 pixel strings, run from a Pixelblaze V3 with 8 x 8 channel output expanders (for 64 outputs total), 512 LEDs in all, measuring about 2ft per side. 3D printed clips hold the LEDs in position with the wire, and provide some diffusion. The LED strings hang from a panel which also houses the electronics. A Sensor Expansion board provides th…

Also, @Sunandmooncouture recently built one from those hanging curtain led things. In the background of this video

> **[Sun and Moon Couture on Instagram: "Vendor booth setup at Knocturnal...](https://www.instagram.com/reel/Cx69N9rvNTJ/?igshid=MzRlODBiNWFlZA==)**
>
> 70 likes, 3 comments - sunandmooncouture on October 2, 2023: "Vendor booth setup at Knocturnal Playground by @kneticsart at @grottoclimbing 
> Remix by @plexusplay 
> Chain jewels by @missjiecouture 
> LEDs by @sunandmooncouture 
> .
> .
> .
> \#pixelblaze...

---

_[View the full topic](https://forum.electromage.com/t/l3d-8x8-cube-mapping/3252)._