# Pixelblaze 3 - unable to login to AP **URL:** \ **Category:** Troubleshooting\ **Created:** [June 3, 2022, 2:22am UTC](https://forum.electromage.com/t/pixelblaze-3-unable-to-login-to-ap/2220 "2022-06-03T02:22:30Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![wizard](https://forum.electromage.com/user_avatar/forum.electromage.com/wizard/32/4_2.png) [@wizard](https://forum.electromage.com/u/wizard)\ **Post date:** [June 3, 2022, 6:38pm UTC](https://forum.electromage.com/t/pixelblaze-3-unable-to-login-to-ap/2220/4 "2022-06-03T18:38:37Z")
Can you get to [http://192.168.4.1/update](http://192.168.4.1/update) If so, upload the update file from the v3.24 release page. > [@V3.24 Release - 2D/3D previews, more controls, backup + restore tool, low power options, and more!](https://forum.electromage.com/t/v3-24-release-2d-3d-previews-more-controls-backup-restore-tool-low-power-options-and-more/2071): > > This is a big one! Compared to V3.20, here’s what’s changed: Features Added live 2d and 3d previews. A new preview pane is visible on the Editor tab. [Screen Shot 2022-03-19 at 3.28.31 PM] Preview pixels up to 1000, up from 100. If you have more it samples across the pixel set, skipping some in between instead of all at the end. Saved previews are downscaled to 100 pixels to conserve storage. Added tons of more UI controls: toggle (switch), trigger (button), and inputNumber (text numbe… That will install the recovery.html tool and reinstall the main web app and update firmware. --- _[View the full topic](https://forum.electromage.com/t/pixelblaze-3-unable-to-login-to-ap/2220)._